Turning the Nebula on, when restoring power back
This guide allows you to ensure your run your Nebula correctly when your Nebula Ice Bath is powered back on.
When the Nebula Ice Bath is powered back on, the current set MODE requires to be turned back ON via the Display. Depending on the MODE selected, this will allow the Nebula Ice Bath to re-function.
The default mode selected when powering the bath back on is FILTER MODE. When the bath is switched to ON on the display, this mode filters the bath for 15 minutes, every 15 minutes ensuring the water stays filtered when the bath is not in use The mode shown on the display does not necessarily mean the bath is turned on and is functioning. When powered back on, the display will default to OFF. When showing ON, this means the bath is on and functioning in its current mode
When the Nebula Ice Bath is powered back on, you will see this screen:
Follow these steps to turn the bath back on in its current mode:
- From the HOMEPAGE, press UP or DOWN until the POWER icon is displayed
- Press the ENTER button
- Press the ENTER button again
- Press the DOWN button until ON is shown
- Press back twice to go to the HOMEPAGE
- The Nebula Ice Bath should now show ON and be in FILTER MODE
- To change modes, on the HOMEPAGE, press UP or DOWN until SET is shown
- Press the ENTER button
- Press the DOWN button
- Press the ENTER button
- Press DOWN to cycle through the different modes and press ENTER on your desired mode
If wanting to change to another mode to start cooling or preparing for your Ice Bath, read this article for information on changing modes
Related Articles
Display not turning on
For general residential users, we advise your bath is drained 100% after 1-2 months of usage and refilled. If you shower before each bath use and your Nebula Ice Bath has been constantly filtering, you may be able to use the same clean water for 3 ...
Setting up the Nebula Ice Bath for the first time
This guide will allow you to prepare, setup and configure the Nebula Ice Bath for the first time after installation or moving it to a different location. Step 1 - Position the Nebula Ice Bath ensuring the back of the bath has a minimum distance from ...
Draining and refilling your Nebula Ice Bath
For general residential users, we advise your bath is drained 100% after 1-2 months of usage and refilled. If you shower before each bath use and your Nebula Ice Bath has been constantly filtering, you may be able to use the same clean water for 3 ...
General Nebula Ice Bath information
Overall Dimensions Tub Dimension Filter information The Nebula Ice Bath is suitable for both Indoor and Outdoor usage Please purchase the Outdoor cover if using the bath outdoors to ensure correct protection for long lasting life Do not place the ...
General cleaning of your Nebula Ice Bath
It is good practise to conduct a general clean of your Nebula Ice Bath every few weeks to ensure it has a long lasting life. Use the following steps as a guide: Wipe the water line inside of the tub With a wet cloth: Wipe clean the top wood Wipe down ...